| |
Please see the Pro-Seal™ main page for general benefits and details of this product.
Kit includes:
- Pro-Seal™
- Larger Air Boot screws
- Air Boot Gasket (1)
- Air Boot Plate (1)
The CR & CRF Pro-Seal™ is 1/4 inch thick. In addition to filling the the gap between the air filter and air box, this special Pro-Seal™ is cut around and the same height as the nipples inside the air box. This creates a perfectly flat sealing surface for the air filter. This flat sealing surface eliminates the tendency that the nipples have of pulling the filter away from the cage when the filter is tightened.
Using silicone or another type of sealant or glue on the stock part will only seal temporarily, if at all. The stock plate is so flimsy, that as you ride, the air boot and plate flex and distort breaking the seal.
The Air Boot Gasket is made of 1/16 inch thick neoprene. This material is waterproof and has memory, so it will have the same perfect seal if you take your air box apart again.
The Air Boot Plate is made of 6061 T6 aluminum and then anodized red. This plate will not flex or distort and in conjunction with the Air Boot Gasket creates a perfect seal for the lifetime of your motorcycle!
|
|
