|
 |
|
| Product Images | |
  |
| Product Description | |
| Filterskins are an extremely thin but durable air filter cover. While allowing maximum airflow, an oiled Filterskin will catch 90% of the dirt that tries to pass through the air filter. Between races or between rides, simply pulling off a dirty Filterskin and sliding on a clean one can save you time and actually save money on expensive solvents and oils. Filterskins are extremely elastic and each size will expand over a wide range of air filter sizes. For the best protection and easier air filter maintenance, we recommend using a FLO Air Filter and Pro-Seal Air Filter Gasket. Works great with: FLO Air Filters Pro-Seal |
| Product Applications | |
| Filterskins work great on most foam and gauze air filters for off road motorcycles, ATV's, and Karts. |
| Product Directions | |
| Completely saturate all three Filterskins with a suitable air filter oil and squeeze out the excess oil. Stretch an oiled Filterskin over a clean, oiled air filter and store the other two Filterskins in the resealable, dust-free bag. As needed between rides, remove the dirty Filterskin and replace with a clean one. After the third Filterskin is dirty, clean all three Filterskins and the air filter with solvent, followed by soap and water. |
| Product Reviews | |
|
"PC Racing has a clever solution... Your filter can breathe again in a matter of seconds..." Dirt Bike Magazine | Read Full Review |
| © 2008 PC Racing. All Rights Reserved. All products found on this website are copyrighted and/or trademarks of PC Racing. |